The DMC-4 Gen3 uses our advanced Gen3 technology in a compact footprint - just 4.7” x 3.7” x 1.4” (120mm x 94mm x 35mm)

Featuring up to nine control modes, the DMC-4 Gen3 is designed to interface with up to four MIDI devices.

Device Control:  Program select and bypass for up to four devices.

Looper Control: Controls the looper on the Strymon Timeline, Eventide H9 / Timefactor, or Line 6 M9/M13.

Utility: User-set actions on left and right buttons (2 commands per button)

Preset: Stores programs from Device Control pages and allows the user to change multiple devices at once.

Set List: Allows the user to re-arrange Preset scenes on the fly

Clock: Access the DMC-4’s built-in MIDI clock and tap tempo interface

Hot Switch: Upper-left switch is user-definable to access tap tempo, favorite preset, hold / freeze, and more.

Side Roller: Large foot-actuated knob allows analog control of expression for your connected MIDI devices.

• Bright blue LED display indicates program number, status, and more

• One 5-pin MIDI port supports MIDI out using a standard MIDI cable, or MIDI input and output using our MIDI Y-Cable.

• One MultiJack connector can function as Expression Pedal input, Tap Tempo Output, Function Switch Output, Footswitch Input, or MIDI Output.

• One Expression connnector can function as Expression Pedal input, Function Switch input, or MIDI output.

• Internal DIP switches to customize MultiJack functions.

• Up to 99 user-accessible presets (if preset page is active.)

• Controls up to four MIDI devices

• Looper control page

• Programmable MIDI clock and tap source to synchronize tempo on multiple pedals

• User-definable Utility page sends any MIDI CC command, MIDI notes, bank up and down, more.

• Optional side roller sends expression data to your connected MIDI devices

• USB MIDI or USB Host connection for advanced control possibilities

• Runs on standard 9V power, 60mA minimum.

The DMC-4 Gen3 also features our astounding MultiJack connector, which can perform several different functions to simplify your setup!

• Connect one or two 1/4″ MIDI devices from companies such as Alexander Pedals, Chase Bliss Audio, Empress, and Meris

• Connect an expression pedal to send MIDI messages to one or more of your devices.

• Connect an external footswitch for tap tempo control.

• Send tap tempo to an external device such as a DD-7, Panther Cub, Flint, and more.

Need more control? Use the USB port to interface with your computer or tablet device and turn the DMC-4 into a USB MIDI controller. Maybe you have a Zoom MultiStomp (MS-50G / MS-60B / MS-70CDR?) or a newer Red Panda pedal? Connect it to the USB port using our gHOST Adapter to control it with MIDI!