Made in the USA by Best-Tronics Pro Audio, these cables feature our exclusive metal right-angle plugs with rotating connector sleeves.

The cables ship from Disaster Area with both ends set in the “12 o’clock” orientation but are easy to re-configure for your application.  Simply loosen the screw on the head shell and carefully rotate the connector sleeve and pins to your desired orientation, then tighten the screw.

The PRO MIDI cables are perfect for flat boards such as Creation, Trailer Trash, or LA Sound Design, and also work great on boards with cable access slots such as Pedaltrains.

Need to fit the plugs through the larger slots on Temple Audio boards? Carefully disassemble the head shell and pass the pin sleeve through the hole, then reassemble on the other side.

Please note:  The 5P-CBA PRO cable requires pin 2 of the controller’s MIDI output to be connected to ground.  If you’re not sure whether your controller supports this, please contact your device manufacturer for more info.  All Disaster Area controllers ground pin 2.

If your controller doesn’t ground pin 2 of its output, you’ll need to use an adapter such as our MIDI BOX ONE or MIDI BOX 4 and the corresponding 1/4″ cable.

• Pins 2 and 5 wired through

• Compatible with Chase Bliss Audio pedals only

• Slim plug design, fits into recessed MIDI ports

• 95% Tinned Copper Braided Shield

• 0.165″ Outer Diameter PVC Jacket

• DN-5501 Right Angle Plugs rotate to 8 different positions

• SquarePlug SP500S low-profile TRS plug

• Hand Soldered

• Limited Lifetime Warranty